Jan 30, 2021     Seat Belts - (8 hours)       Category: Fuselage

Installed the 3 point front seat belts. The center latching will not be installed until the rear portion of the center console is complete.

The shoulder attachment point needed both sides to be reamed with a Dremel tool for the bolt to fit. I found the bolt to put too much pressure on the composite so I made a spacer to prevent seating pressure on the composite..

The inertial reel had to have the belt removed so as to feed the belt through the side longerons. The trick is to make sure the inertial reel doesn't spin back to the retract position.